Search: Browse by Category:
FAQ Main Page
ASK QUESTION
View Questions by Category:

Technical Support (12)Application Support (7)Customer Support (2)
 
Top 5 Articles
The TRB transmitter output periodically drops down to 4 mA. Where is the problem?
Some noisy signals can provoke the transient filter to mark them as \"too noisy\" setting transmitter output to 4 mA. Switch off the peak filter by setting Gradient=0. If necessary - make the ......
●●●●● Last Update: 2010-12-17 Views: 5
After TraCon starting, the program says: "socket error...access denied". What's wrong?
It is probably due to the firewall/antivirus software installed. Please adjust its settings to accept TraCon as a friendly program....
Not Rated Last Update: 2010-11-22 Views: 5
Cannot setup TC800 relay outputs via keyboard during communication!
TC800 with ACSII protocol allows both input reading and relay control via interface and does not allow relay control via keyboard!Stop the communication and set the outputs or change the protocol ......
Not Rated Last Update: 2010-11-22 Views: 4
Cannot control TC800 relay outputs via interface...Why?
TC800 with BINARY protocol does not allow relay control via interface!Change the protocol with ASCII....
Not Rated Last Update: 2010-11-22 Views: 4
Cannot download ZIP files with Internet Explorer 7. What to do?
Change IE7 settings as follows: Start IE and select \'Tools\' - \'Internet Options\' Open \'Security\' tab Click \'Custom level...\' button Scroll down to find \'Downloads\' Enable \'Automatic prompting for file downloads\' Click OK - YES - OK ......
Not Rated Last Update: 2010-11-10 Views: 3
Last 5 Articles
We need to re-calibrate TI08 in order to eliminate measurement discrepancy between the unit and the calibrated meter.
1.    If the error is the same in all measurement range (offset), just set the parameter “Display Offset” (oFFS) to the desired value eliminating the discrepancy.2.    If you are observing different errors ......
Not Rated Last Update: 2012-03-07 Views: 2
What is the fastest response you can get on TRZ?
If the software low-pass filter is switched off, the TRZ minimum response time is ~150 ms.That means TRZ will react to every signal on its input, including noises.Activating the low-pass filter ......
Not Rated Last Update: 2012-02-14 Views: 1
How to understand the use of Low-pass filter implemented in COMECO devices?
This is a standard low-pass filter (parameter \'Filter Time\') combined with a possibility  to limit the filter action zone (parameter \'Filter Band\') during the transition process.    In the example ......
Not Rated Last Update: 2012-01-19 Views: 1
Do you have any comment to use type K thermocouple at around zero C?
Using high-temperature T/C like K, J, N, S, R, etc. at temperatures around and below 0 C is not recommended in practice. Even if the use is below “cold junction” temperature is not ......
Not Rated Last Update: 2012-01-12 Views: 1
PHG with sintered filter option has a very slow reaction. Is that normal?
Sintered filters are very good to prevent different sensors (RHx, PHG, etc.) from dirt and water condensation, but they really make the response much slower. Usually CO2 measurement and control applications do ......
Not Rated Last Update: 2012-01-12 Views: 1